Vertical Machining Center
| Travel For 3-Axes | ||
|---|---|---|
| X-Axis Travel | mm | 700 |
| Y-Axis Travel | mm | 450 |
| Z-Axis Travel (Optional) | mm | 540 ( 410 ) |
| Spindle Nose To Workable Surface(Optional) | mm | 80 - 620 ( 80 - 490 ) |
| Spindle | ||
| Spindle Speed | rpm | 10000 |
| Automatic Tool Changing System | ||
| Number of Tools | one of a pair | 24 |
| Max. Tool Diameter (With Adjacent Tool / Without Adjacent Tool ) | mm | 80 / 120 |
| Max. Tool Length | mm | 250 |
| Max. Tool Weight | kg | 6 |
| Tool Changing Method | Arm | |
| Tool Specifications | BT-40 | |
| Motor | ||
| Spindle Motor (Continuous/30min. Rated) | kw ( HP ) | 5.5 / 7.5 ( 7.5 / 10 ) |
| Motors On X/Y/Z-Axis | kw | 1.5 / 1.5 / 2.0 |
| Worktable | ||
| Worktable Area | mm | 850 x 450 |
| Worktable Max. Load Capacity | kg | 250 |
| T-Slot (Number X Width X Distance From The Center) | mm | 5 x 18 x 80 |
| Rapid Speed | ||
| X-Axis Rapid Speed | M / min | 36 |
| Y-Axis Rapid Speed | M / min | 36 |
| Z-Axis Rapid Speed | M / min | 24 |
| Cutting Feed Rate | mm / min | 1 - 20000 |
| Controller | ||
| Mitsubishi | M80 | |
| Miscellaneous | ||
| Machine Weight | kg | 4200 |
| Power Consumption | KVA | 15 |
| Coolant Tank Capacity | L | 130 |
| Compressed Air Source | kg / cm2 | 6 |
- Standard
- Options
- Upon Request
- Spindle
- Spindle Speed 10000RPM
- Spindle Oil Cooler 12000RPM
- Spindle Speed 15000RPM
- Spindle Oil Cooler
- Coolant Through Spindle (CTS)
- Spindle Air Seal System
- Spindle Head Coolant Cooling System
- Cooling System
- Spindle External Programmable Air Blow System
- Stop Block For Oil Feed Tool Holder
- Programmable Coolant Nozzle
- Splash Ring (Arm Type Only )
- Coolant Cooling System
- Chip Removal
- Chip Auger Inside The Machine
- Chip Conveyor
- Chip Cart
- Water Gun
- Air Gun
- Wash Down Device
- Hood For The Top Of The Machine
- Full Enclosure
- Measuring System
- Infrared Tool Breakage Detection
- Tool Length Measurement System
- Workpiece Measurement System
- CCD Measurement System
- Production And Workshop
- Production Management And Network Service
- Human-Machine Interface – Intelligent Machine
- Oil Mist Collector
- Oil/Coolant Separator
- Disc Type Oil/Coolant Separator
- Machine Oil/Coolant Separation System
- ATC System
- Automatic Tool Changer Mechanism (ATC)
- Taper BT-40
- Arm Type Tool Magazine 24T
- 3 Axes Transmission
- 3-Axes Coolant Thru Ballscrew (CTB)
- 3 Axes Roller Type Linear Guideways
- 3 Axes Linear Scales
- Z Axis Motor System W/ Brake
- Control
- Mitsubishi M80
- FANUC 0i-MD
- Siemens 828D
- Electrical
- Worklight
- Alarm Light
- M30 Automatic Power Off System
- Heat Exchanger
- Air Conditioner
- Miscellaneous
- 4th Axis (Rotating Table)
- Tooling
- DDR Embedded Motor (Mitsubishi System Only)
