Three-Vertical Machining Center Sv-1000

三主軸加工機
Three-Vertical Machining Center Sv-1000
SV-1000
Travel For 3-Axes
X-Axis Travel mm 1020
Y-Axis Travel mm 600
Z-Axis Travel mm 635
Spindle Nose To Workable Surface mm 95~730
Spindle
Spindle Speed rpm 6000
Automatic Tool Changing System
Number of Tools one of a pair 6
Max. Tool Diameter mm 60
Max. Tool Length mm 160
Max. Tool Weight kg 4
Tool Changing Method   2 Sets For Inter-Changing (Arm)
Tool Specifications   BT-40
Motor
Spindle Motor (Continuous/30min. Rated) kw (HP) 7.5/11 (10/15)
Motors On X/Y/Z-Axis kw 2 /2 /3.5
Worktable
Worktable Area mm 1200 x 560
Worktable Max. Load Capacity kg 1000
T-Slot (Number X Width X Distance From The Center) mm 5 x 18 x 100
Rapid Speed
X-Axis Rapid Speed M/min 18
Y-Axis Rapid Speed M/min 18
Z-Axis Rapid Speed M/min 18
Cutting Feed Rate mm/min 1-8000
Controller
Mitsubishi M70
Miscellaneous
Machine Weight kg 7000
Power Consumption KVA 25
Coolant Tank Capacity L 290
Compressed Air Source kg/cm2 6
  • Standard
  • Options
  • Upon Request
  • Standard
    • Chip Auger Inside The Machine
    • Fully-Covered Sheet Metal
    • Automatic Lubrication System
    • Leveling Bolts And Blocks
    • Tool Box
    • Work Light
    • Alarm Indicator
    • M30 Automatic Power Off System
    • Chip Cart
    • Air Gun For Machine Cleaning
    • Spindle Dust-Proof Air-Sealing System
    • Coolant Gun For Machine Cleaning
    • Machine, Electrics Operational Manual
    • Rigid Tapping
    • Heater Exchanger For Electrical Cabinet
    • Machine Oil/Coolant Separation System
    • Automatic Tool Changer Mechanism
    • Hood For The Top Of The Machine
  • Options
    • Spindle External Programmable Air Blow System
    • FANUC/Mitsubishi
    • Chip Removal System
    • Rotating Table (Forth Axis)
    • 3-Axes Linear Scale
    • Tool Length Measurement System
    • Disc Type Oil/Coolant Separator
    • 3-Axes Coolant Thru Ballscrew
    • Z-Axis Brake Motor System
    • Chip Conveyor
Contact