5 AXES Efficiency Horizontal Machining Center

5 AXES Efficiency Horizontal Machining Center
5 AXES Efficiency Horizontal Machining Center
HU-1000
Movement
X/Y/Z Axis Travel mm 1000/880/710
B Axis (Swing Head) deg. -0 ~ +180
Spindle Nose To Work Table (Vertical) mm 110 ~ 820
Spindle Center To Work Table (Horizontal) mm 56 ~ 766
From The Nose Of The Spindle To The Center Of The Work Table (Horizontal) mm -146 ~ 734
Work Table
Work Table Size mm Ø1000
Max. Workpiece mm Ø1000
Max. Height Of Work Piece mm 1500
Max. Load Of Work Table Kg 1500
T-Slot mm 18
Mini. Worktable Division Angle deg. 0.001
Work Table To Ground Height mm 1175
Spindle
Max. Spindle Speed RPM 18000
Max. Torque N-m 154
Spindle Taper   ISO40
Spindle Bearing Inner Diameter mm Ø65
Spindle Transmission Mode   built-in motor
Feeds
X/Y/Z Rapid Speed mm/min 36000
Cutting Feed mm/min 1-20000
Manual Feed mm/min 1260
A.T.C.
Tool Handle Type   HSK63A
Tool Storage Capacity T 40
Max. Tool Diameter ( Without Tool Adjacent) mm Ø70（Ø125）
Max. Tool Length mm 340
Max. Tool Weight kg 7
Control system
Controller system   Siemens ONE
Power Supply
Power Supply KVA 42
Capacity of oil tank/coolant tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, coolant system L 620
Mechanical Specifications
Height mm 3825
Floor area mm 5737 x 4200
Weight Kg 18000
  • Standard
  • Optional
  • Inquiry Needed
  • Spindle system
    • Spindle System HSK-63A
    • Spindle System BT-40
    • Spindle System CAT-40
    • Spindle System DIN-40
    • Spindle Speed 18000 RPM
    • Torque motor drive
    • Spindle cooling system
  • B-axis rotary milling head
    • Torque motor drive
    • 0.001 degree division
  • C-axis rotary table
    • Worm gear drive
    • 0.001 degree division
    • Workbench T-slot (W18)
  • High-precision correspondence
    • 3-Axis Linear Scale
    • X/Y/Z Hollow cooling of shaft guide rod
    • B-Axis Linear Scale
    • C-Axis Linear Scale
  • Measuring System
    • Tool length measuring system
    • Centering Calibration Function
  • Environmental response
    • In-machine oil-water separation system
    • Oil demister system
    • Disc oil-water separator
  • Cutting fluid corresponding
    • Spindle annular water spray
    • Water spray outside the spindle
    • Spindle outer blowing system
    • Coolant Through Spindle ECO (30Bar)
    • Coolant Through Spindle (70Bar)
  • control system
    • Siemens ONE (5-Axis/5-Interactive)
    • FANUC 31i-B5 (5-Axis/5-Interactive)
    • HEIDENHAIN TNC7 (5-Axis/5-Interactive)
  • Electrical Components
    • M30 Automatic Shutdown System
    • Worklight
    • Alarm light
    • Electrical box heat exchanger
    • Air conditioner
  • Chip Conveying System
    • Chain-type Chip Conveyor
    • Chip Collector
    • Internal screw chip augers
    • Machine top chip removal system
  • ATC Unit
    • Tool Magazine Capacity 40T
  • Automated response
    • automatic front door
  • Safety System
    • Front door/side door safety switch
    • CE Safety Specification
  • Others
    • Rotary Window
Contact